Sincerely at your service

The ring LEDs and a initial button LED will be flicker on and off in use for 4 months .
In order to purchase supplies, please push the purchase button on your mobile phone or call at local retailer.

· mobile app : main – purchase (push the button)
· Retail shop : 00-000-0000

You will get a voice prompt “Please replace the supplies.” in use for 4 months.

When used firstly, Setup is automated and environments are provided in a predefined initial state.
However we suggest to reset the device through dedicated mobile app or the reset button on the bottom of the right side of Healair.

Please click download link on the web site to download the firmware update and follow the instructions.
① Download firmware.bin to the MicroSD card and put it in the root directory (Top level folder).
② Insert the MicroSD card in the camera.
③ Connect the camera to a power source, then switch on the camera.
④ A firmware update notice will pop up on the screen.
⑤ Wait for 1-5 minutes before the update is successful and the camera is restarted automatically.

Please click download link on the web site to download the firmware update and follow the instructions.
① Download firmware.bin to the MicroSD card and put it in the root directory (Top level folder).
② Insert the MicroSD card in the camera.
③ Connect the camera to a power source, then switch on the camera.
④ A firmware update notice will pop up on the screen.
⑤ Wait for 1-5 minutes before the update is successful and the camera is restarted automatically.

Please make sure if you use the coaxial cable that came with the dash cam.
The other similar cables may cause compatibility issues.
Also if the connection pins of the coaxial cables are damaged, please buy a new coaxial cable.

The location of the camera, the cleanliness of lens and car window,
and the light transmittance of the car window all have influences on the quality of the video.
So it is advised that you clean the lens and the windscreen glass before recording,
and install the device properly according to the installation instructions.

① Upgrade your dashcam’s firmware to the lastest version available on our website.
② GPS may take 10~15 minutes to lock on after you start driving.

Please make sure if the power cable is plugged properly.
If so, remove the cigar jack, wait for 30 seconds and plug it in again to see if the LED is turned on.

The product supports 12~24V and can be used with any type of vehicle.